MIC Chinese Simplified Chinese Traditional English

Home » Offer Board » Electrical & Electronics » Telecommunication & Broadcasting » Other Communication Products » 10/100M UTP to 100M Multi-mode with 20km

Add to Basket

10/100M UTP to 100M Multi-mode with 20km

Offer Type: Sell
Offer Post Time: 2009-04-14
Expiration Date: 2010-04-14
Details: Special Features:
MM to SM fiber converter is used to convert multi-mode fiber signal to single mode equivalent that extends the long span fiber connections easily and inexpensively
Gigabyte Ethernet supports long wave 10/100/1, 000 base-LX/1, 000 base-LX and short wave 10/100/1, 000 base-SX/1, 000 base-SX fiber network
This media converter can be installed as a standalone unit or as a slide-in module to the 19-inch converter rack (up to 10 units) for use at a central wiring closet
Purchasing guide for gigabyte optical transceivers

Model specifications:
10/100M multi-mode to single mode (1, 300/1, 310nm, 25km)
Two 100M multi-mode to single mode (850/1, 310nm, 10km)

Packing list:
Please check the following items in the package before the installation of transceiver
1 gigabyte optical transceiver
1 AC/DC adapter (outside)
1 power line (built-in)
1 warranty card
1 user manual

Fiber interface:
SC fiber interface is of duplex mode type, including two interfaces, namely TX and RX When the two sets of optical transceiver are interfaced or connected to switchboard with fiber interface, the fiber is in cross connection, namely TX-RX/RX-TX

Connection:
The network device (workstation, hub, or switch) with the multi-mode (single mode) fiber is connected to SC/ST fiber interface of optical transceiver
Then switch on
The corresponding LED is on for correct connection (see the table below for the LED indicator)

Click here to send inquiry

Most Popular

Related Searches